Main characteristics:
1, IGBT module and Inverting technologies of third generation been used;Higher reliability and lower maintenance cost.
2, 100% Duty cycle, continuous working is allowed at maximum power output.
3, Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
4, Display of heating power and heating current and oscillating frequency;
5, Simple to install, Installation can be done by unprofessional person very easily;
6, Light weight
7, Advantages of the model with timer:The power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
8,The separated models are designed to fit the dirty surrounding of some cases.
Digital CNC Electric Hardening Machine Surface quenching of steel screws
Railway metal surface quenching equipment with CNC induction hardening Machine
Type | CDH-80AB |
Work power | 3×380V/50-60HZ |
The range of operating voltage | 340V-420V(370-450)V AC |
Output power | 80 KW |
Fluctuating frequency | 30-80KHZ |
Output current | 400-3800A |
Timing (Heat time,Retain time,Cool time) | 1-99S |
The flow rate of cooling water | 0.2Mpa,9L/Min |
Water temperature protection point | 40ºC |
Duty cycle | 100% (40degree room temperature) |
Weight | Mainparts:70Kg extension:48kg |
Size | Main parts:500*304*402mm Extension:800*470*560mm |
Railway metal surface quenching equipment with CNC induction hardening Machine
Digital CNC Electric Hardening Machine Surface quenching of steel screws
Application:
Quench for various hardware and tools,such as plier,wrench,hammer,ax,screwing tools and shear(orchard shear).
Quench for various automobile and motorcycle fittings,such as crankshaft,connecting rod,piston pin,chain wheel,aluminum wheel,valve,rock arm shaft,semi drive shaft,small shaft and fork.
Various electric tools,such as gear and axes.
Quench for machine tools,such as lathe deck and guide rail.
Quench for various hardware metal parts and machined parts,such as shaft,gear(chain wheel),cam,chuck and clamp etc.
Quench for hardware molds,such as small-size mold,mold accessory and inner hole of mold.