Energy Saving Steel Induction Heater For Hammer Forging (GYS-400KW)
Guangyuan as induction heating machine manufacture which found in 2000.Over these years we had
develop the reliable quality products.Products divide high frequency,medium frequency,super audio frequency,ultrahigh frequency.In order to fit customer requirement,we had produce special input voltage products,such as three phase 110V,220V,450V,480V.Also now good have further step,design full automated system,such as melting furnace,forging furnace,hardening fixture and so on.
Our induction heating machine better performance at hot forging, hardening,heat-treatment,brazing,
bending,melting,annealing,shrink fitting and so on.
Application:
Forging(Bar,flat plate,bar end heating,pipe ends,bar end heating)
Pre-heating(Pipe,steel wire,stainless steel wire)
Brazing(Saw blades,carbide tools,cooper tube,aluminum part,drilling tools,Pan)
Annealing(Steel pipe,golf ball head,brass lock,aluminum pan)
Hardening(Gear,shaft,pipe,bearing,pump fitting,steel plate,roller)
shrink fitting(motor,pipe)
Melting(Iron,steel,brass,aluminum,silver,zinc)
Advantage:
Nearly 20 years experience, stable and goods performance
CE,SGC,FCC,ROSH certificated
Cooperated with GM,VOLVO,HONDA and so on.
Suitable for a large range, heating, quenching, forging, melting, soldering and so on.
Less environment pollution
High efficiency,high output&high reliability
Small size &light weight
Work continuously for 24 hours
Delivery Time: within 25 workdays.
Shipping Term:By sea,By air,by express.
Extra accessories accept choose,
1>Chiller
2>Customer design Coil Box
3>Infrared Thermometer
4>Back-up Electronic Boards
5>Forging Furnace(Depends on Heating rod size customs design)
Machine Work Photo In Customer Factory
Guangyuan as induction heating machine manufacture which found in 2000.Over these years we had
develop the reliable quality products.Products divide high frequency,medium frequency,super audio frequency,ultrahigh frequency.In order to fit customer requirement,we had produce special input voltage products,such as three phase 110V,220V,450V,480V.Also now good have further step,design full automated system,such as melting furnace,forging furnace,hardening fixture and so on.
Our induction heating machine better performance at hot forging, hardening,heat-treatment,brazing,
bending,melting,annealing,shrink fitting and so on.
Application:
Forging(Bar,flat plate,bar end heating,pipe ends,bar end heating)
Pre-heating(Pipe,steel wire,stainless steel wire)
Brazing(Saw blades,carbide tools,cooper tube,aluminum part,drilling tools,Pan)
Annealing(Steel pipe,golf ball head,brass lock,aluminum pan)
Hardening(Gear,shaft,pipe,bearing,pump fitting,steel plate,roller)
shrink fitting(motor,pipe)
Melting(Iron,steel,brass,aluminum,silver,zinc)
Advantage:
Nearly 20 years experience, stable and goods performance
CE,SGC,FCC,ROSH certificated
Cooperated with GM,VOLVO,HONDA and so on.
Suitable for a large range, heating, quenching, forging, melting, soldering and so on.
Less environment pollution
High efficiency,high output&high reliability
Small size &light weight
Work continuously for 24 hours
| MFP | GYM-40KW | GYM-80KW | GYM-100KW | GYM-120KW | GYM-160KW | GYM-200KW | GYM-250KW | GYM-300KW | GYM-400KW | GYM-500KW |
| Bar Diameter | 15~30(mm) | 15~50(mm) | 20~50(mm) | 20~50(mm) | 25~80(mm) | 25~100MM | 25~110MM | 40~120(mm) | 40~140(mm) | 40~140(mm) |
| Production Rates | 0.1~0.12(T/h) | 0.2~0.25(T/h) | 0.2~0.25(T/h) | 0.2~0.3(T/h) | 0.3~0.37(T/h) | 0.4~0.6(T/h) | 0.4~0.65(T/h) | 0.7~0.8(T/h) | 0.8~0.9(T/h) | 1.0~1.2(T/h) |
| Output Power | 40KW | 80KW | 100KW | 120KW | 160KW | 200KW | 250KW | 300KW | 400KW | 500KW |
| Input Current | 60A | 120A | 150A | 180A | 240A | 300A | 375A | 450A | 600A | 750A |
| Work Frequency | 1~10KHZ | |||||||||
| Work Power | 380V/50~60HZ 3phases | |||||||||
| Duty Cycle | 24Hours non-stop | |||||||||
| Dimension | Customs Design depends on bar size | |||||||||
Shipping Term:By sea,By air,by express.
Extra accessories accept choose,
1>Chiller
2>Customer design Coil Box
3>Infrared Thermometer
4>Back-up Electronic Boards
5>Forging Furnace(Depends on Heating rod size customs design)
Machine Work Photo In Customer Factory