We use cookies to enhance your experience. By continuing to browse this website, you agree to our use of cookies. More information.

Improper installation of induction heating coils usually leads to problems that eventually require service calls. According to Mark Kozlowski, eldec's engineering service manager, the correct installation of the coil can avoid costly downtime and repairs.

Note: This coil diagram may be different from the coil used. Please refer to the user manual.

When installing the induction heating coil, please pay attention to the following steps and tips:

warn! Be sure to use only brass washers and nuts.

Use the following torques when tightening the nuts:

Please also note the following:

This information is derived from materials provided by Eldec LLC and has been reviewed and adapted.

For more information on this source, please visit Eldec LLC.

Please use one of the following formats to cite this article in your paper, essay, or report:

Elderke LLC. (2018, July 24). Tips for installing coils in induction heaters. AZoM. Retrieved from https://www.azom.com/article.aspx?ArticleID=14643 on November 16, 2021.

Elderke LLC. "Induction heater coil installation tips". AZoM. November 16, 2021. <https://www.azom.com/article.aspx?ArticleID=14643>.

Elderke LLC. "Induction heater coil installation tips". AZoM. https://www.azom.com/article.aspx?ArticleID=14643. (Accessed November 16, 2021).

Elderke LLC. 2018. Installation skills of induction heater coils. AZoM, viewed on November 16, 2021, https://www.azom.com/article.aspx?ArticleID=14643.

Do you have any comments, updates, or anything you want to add to this article?

AZoM talks with Dr. Robert Shepherd from Cornell University. In their research, Dr. Shepherd and his team produced a key component of a technology that can make inflatable braille that changes shape under the touch of the user a reality. Triggered by burning, Dr. Shepherd and his team created a hapt

Michael is part of a team of researchers at the Massachusetts Institute of Technology, which has developed a data-driven system that accelerates the process of discovering new 3D printing materials.

Coxem has developed a new automated large-area particle analyzer based on SEM (Scanning Electron Microscope), which can be used to analyze and classify particles by size and element.

The Extrel VeraSpec atmospheric pressure ionization mass spectrometer (APIMS) is designed to provide reliable and reproducible low part-per-trillion detection limits for pollution control in ultra-high purity (UHP) gases used in semiconductor and other high-tech industrial applications.

For many years, rotovaps (rotovaps) have been the standard for laboratories and industries that perform chemistry, such as laboratories in the pharmaceutical, chemistry, life sciences, materials, environment, and cannabis sectors.

IMA FLUORESCENCE™ is an integrated hyperspectral fluorescence microscope dedicated to life sciences, very suitable for studying the properties of organic and inorganic substances.

New research in China Physics Letters investigated the superconductivity and charge density waves in single-layer materials grown on graphene substrates.

This article will explore a new method that makes it possible to design nanomaterials with an accuracy of less than 10 nm.

This article reports on the preparation of synthetic BCNTs by catalytic thermal chemical vapor deposition (CVD), resulting in rapid charge transfer between the electrode and the electrolyte.

AZoM.com-AZoNetwork website

Owned and operated by AZoNetwork, © 2000-2021